SCHNEIDER BAM-1000 alarm modules can be mounted on site wherever required. They are supplied in a surface-mounting housing design (150 x 150 x 50 mm). Along with direct smoke and fire alarms, functions also include the possibility of an integrated flap drive test. Unrestricted configuration of network variables make it possible to assign any number of flap drives to one or more smoke or fire alarms. A fire alarm in an alarm module automatically triggers the monitored closing process of any number of assigned fire protection flaps. This signal is received by the building services management system at the same time and the motor controller releases the appropriate signal to the LON network upon completed closure. The building services management computer initiates the appropriate action and also checks all incoming telegrams for plausibility. This concept guarantees a very high standard of safety for the user.

The SCHNEIDER BMC-1000 motor controller can operate up to four flap drives (fire protection and/or smoke removal flaps in random array). Switching the motorised flaps on and off is time controlled. The motor current is monitored for permitted levels at the same time. An appropriate fault signal is issued in the bus network if there are any malfunctions. An integrated test function enables easy visual and functional examination of the flap drives in the system. Corresponding LED's signal the status of the respective motor drives.

Microprocessor based system for control and monitoring of fume hood exhaust air volume flow or face velocity in relation to the front sash and slide window opening. Depending on the configuration different operating modes for fume hood control (e.g. fully variable, face velocity, sash sensor) are possible.

The integrated functional monitoring in accordance with EN 14175 offers maximum safety for laboratory staff. When the exhaust air setpoint that is to be regulated is underrun, an acoustic and optical alarm is activated.

Suitable for all fume hood constructions and extraction units. Standard model with differential pressure transmitter.

The multi-functional and user-programmable room management controller takes over the complete operating mode control and monitoring of a laboratory room.

RMC700 is the HMI (Human Machine Interface) between the laboratory personnel and the building management system (BMS). The plain text messages with custom graphic symbols (icons) and with multi coloured backlight allowing a clear and simple priority-driven allocation of the actual operating conditions.

Microprocessor controlled, high-speed adaptive control system for variable control of room supply air and room exhaust air volume flows, particularly suitable for clean rooms and laboratories. A high-speed control algorithm compares the setpoint with the actual value measured by a differential pressure transmitter and regulates the flow quickly, precisely and steadily, independent of pressure fluctuations in the duct system. The minimum and maximum volume flow setpoint is freely programmable and is saved mains voltage failure-safe in the EEPROM.

Microprocessor controlled, high-speed adaptive control system for variable control of room supply air and room exhaustair volume flows, particularly suitable for clean rooms and laboratories. Advanced requirements need a heating or cooling, and a pressurization of the room. In addition to these features the multi-functional flow Controller VAV500 provide up to 7 analogue inputs 0 (2) ... 10V DC for connecting consumers (e.g. fume hood controller FC500) and calculates the room balance. In network operation (LON,BACnet, Modbus) up to 16 consumers are accounted for.

The retrofit interfaceboards LON, BACnet or Modbus ensure an individual, efficient and cost-effective direct connection to the building management system (BMS).

High resolution pressure controller with volume flow limitation and innovative bypass controller for airtight laboratories and clean rooms.
VCP500 is available as a round model and quickly, stably and very precisely regulates up to three programmable constant room pressures.
Particularly suitable for laboratories (S1-S3), clean rooms (classes A-D), animal facilities and air locks.
Optionally VCP500 can be equipped with a LON field bus module (FTT10-A), BACnet (MS/TP) or Modbus (RS485) and thus simplifies connection to the BSM.

Microprocessor controlled, high-speed volume flow measuring system of room supply air and room exhaust air volume flows in manifolded ducts. Suitable for different measuring tasks, such as fume hoods, safety cabinets and other exhaust air and supply units.

The exhaust air and supply air volume flow is measured very stable and accurate and is as actual analogue value 0 (2) ... 10V DC or in LON-network mode as a standard variable (SNVT) available.

The retrofit interfaceboard LON, BACnet or Modbus ensure an individual, efficient and cost-effective direct connection to the building management system (BMS).

The system data and setpoint values are freely programmable and will be saved voltage fail-safe in the EEPROM.